黑料网

Department of Electrical and Computer Engineering

Professors Emeritus/a:听Timothy J. Healy, Dragoslav D. Siljak, Sarah Kate Wilson,

Thomas J. Bannan Professor: Shoba Krishnan (Chair)

Professors:听Tokunbo Ogunfunmi, Sally Wood, Cary Y. Yang, Aleksandar Zecevic

Associate Professors:听Maryam Khanbaghi, M. Mahmudur Rahman, Hoeseok Yang

Assistant Professors:听Anoosheh Heidarzadeh, Maria Kyrarini, Kurt听Schab, Dat Tran, S.J.

The Electrical and Computer Engineering Department offers major programs leading to the bachelor of science in electrical 听engineering or the bachelor of science in electrical and computer engineering, as well as required and elective courses for students majoring in other fields.

Electrical and computer engineering includes the broad range of design, construction, and operation of electrical components, circuits, and systems as well as the science and technology of design, construction, and implementation of the software and hardware components of modern computing systems and computer-controlled equipment. This includes sustainable energy and electric power, signal and image processing, machine learning, embedded systems, control systems, nanotechnology and integrated circuits, antennas, RF and communication systems, and storage, compression, and transmission of information.

Laboratories are an important part of most undergraduate courses in the electrical and computer engineering program. Use of appropriate laboratory equipment, design tools, and components demonstrates fundamental concepts of the courses and acquaints students with methods and tools they may use after graduation. The department has five teaching laboratories that support courses in听electric circuits, electronics, signal processing and control systems, logic design and digital and embedded systems,听and RF and communication. In addition, the program has a laboratory dedicated to senior design projects. All laboratories are听supported by the facilities of the Engineering Computing Center.

Requirements for the Majors

Major in Electrical Engineering听

In addition to fulfilling the undergraduate Core Curriculum requirements for a听bachelor of science degree in a field of engineering, students majoring in electrical engineering must fulfill the following major requirements and complete a minimum of 190 units. For every required engineering and science course, if an associated laboratory is listed following the course description, then that laboratory is also required to fulfill the major requirements.

English

  • ENGL 181

Mathematics and Natural Science

  • MATH 11, 12, 13, 14
  • AMTH 106 听and AMTH 108
  • CHEM 11 or 11T
  • PHYS 31, 32, 33
  • PHYS 34 or MATH 51
  • One from CHEM 12, PHYS 113 or 121, MATH 53, 105 or 123

Engineering

  • ENGR 1
  • CSEN 10 (or demonstrated equivalent programming proficiency)
  • CSEN 11, CSEN 12
  • MECH 121
  • ECEN听20, 21, 50, 100, 104, 110, 115, 120, 192, 194, 195, 196

Technical Electives

Five听undergraduate ECEN 100-level听elective courses are required. One听course听must be selected from at least four of the following five听areas:

  • IC Design: ECEN听116, 117, 151, 152, 153, 156
  • Systems: ECEN听118, 130, 132, 133, 134, 160, 161, 167
  • RF and Communication: ECEN听105, 141, 142, 144
  • Power Systems: ECEN听164, 183, 184
  • Digital and Embedded Systems: ECEN 121, 122, 123, 127, 131, 162, 180

Additional electives may be substituted, with the approval of the advisor, including first-year graduate-level electrical engineering coursework. ECEN 188 and 189 may not be used as technical electives.

Professional Development

A professional development experience selected from one of the following options:

  • Four听or more units in a study abroad program that does not duplicate other coursework
  • Cooperative education experience with enrollment in ECEN听188 and ECEN听189
  • 2 units in ENGR 110 (Community-Based Engineering Design)
  • Preparation for graduate study in electrical engineering with completion of 2 or more additional units of upper-division or graduate-level courses
  • Completion听of an approved minor or second major in any field of engineering or science
  • Completion of 10 or more units in the combined bachelor of science and master of science program
  • 2 units of Peer education experience
  • 2 units of undergraduate research, ECEN 199

Major in Electrical and Computer Engineering

In addition to fulfilling the undergraduate Core Curriculum requirements for a bachelor of science degree in 听a field of engineering, students majoring in electrical and computer engineering must fulfill the following major requirements and complete a minimum of 190 units. For every required engineering and science course, if an associated laboratory is listed following the course description, then that laboratory is also required to fulfill the major requirements.

English

  • ENGL 181

Mathematics and Natural Science

  • MATH 11, 12, 13, 14, 51, 53
  • CSCI 163
  • AMTH 106 and AMTH 108
  • PHYS 31, 32, 33
  • One course selected from CHEM 11 or 12, PHYS 34, 113 or 121, MATH 105 or 123

Engineering

  • ENGR 1
  • CSEN 10, 11, 12, and 177
  • ECEN 20, 21, 50, 100, 115, 120, 121, 122, 133, 142, 192, 194, 195, 196

Technical Electives

Three undergraduate ECEN 100-level elective courses approved by an academic advisor are required. At least one must be selected from ECEN 123, 127, 131, 162, 180. 听With advisor approval at most one may be selected from CSEN courses. ECEN 188 and 189 may not be used as technical electives.

Additional electives may be substituted, with the approval of the advisor from first-year graduate-level engineering coursework

Professional Development

A professional development experience selected from one of the following options:

  • 4 or more units in a study abroad program that does not duplicate other coursework
  • Cooperative education experience with enrollment in ECEN 188 and ECEN 189
  • 2 units in ENGR 110 (Community-Based Engineering Design)
  • Preparation for graduate study in either electrical and computer engineering or computer science and engineering with completion of 2 or more additional units of upper-division or graduate-level courses
  • Completion of an approved minor or second major in any field of engineering or science
  • Completion of 10 or more units in the combined bachelor of science and master of science program
  • 2 units of Peer education experience
  • 2 units of undergraduate research, ECEN 199

Requirements for the Minors

Minor in Electrical Engineering

Students must fulfill the following requirements for a minor in electrical engineering:

  • ECEN听21, 21L, 50, 50L, 115, 115L
  • Two courses selected from ECEN听100, 104, and 110, including their associated laboratory courses
  • Three upper-division ECEN听lecture courses (ECEN听100-level courses, excluding ECEN听188, 189, 192, 194, 195, and 196)
  • Work completed to satisfy these requirements for the minor must include at least two courses beyond any free electives or other courses required to earn the bachelor鈥檚 degree in the student鈥檚 primary major

Minor in Electrical and Computer Engineering

听

  • ECEN 21, 21L, 50, 50L, 120, 120L
  • Two courses selected from ECEN 122, 133, and 142, including their associated laboratory courses
  • Three additional upper-division Electrical and Computer Engineering lecture courses (ECEN 115, 121, 122, 123, 127, 131, 133, 142, 153, 162, 180)
  • Work completed to satisfy these requirements for the minor must include at least two courses beyond any free electives or other courses required to earn the bachelor's degree in the student's primary major

Combined Bachelor of Science and Master of Science Program

The Department of Electrical and Computer Engineering offers a combined degree program leading to the bachelor of science in either major and a master of science听in electrical and computer engineering. This program is open to majors with an approved grade point average in electrical and computer engineering, mathematics, and physics courses. Under the combined degree program, an undergraduate student begins taking courses required for a master鈥檚 degree before completing the requirements for the bachelor鈥檚 degree and typically completes the requirements for a master of science in electrical and computer engineering within a year of obtaining the bachelor鈥檚 degree. Undergraduate students interested in the combined degree program are required to apply for the program between February of their junior year and December of their senior year.

Students in this program will receive their bachelor鈥檚 degree after satisfying the full undergraduate degree requirements. To earn the master鈥檚 degree, students must fulfill all the requirements for the degree, including the completion of 46听units of coursework beyond that applied to their bachelor鈥檚 degree. No course can be used to satisfy requirements for both the bachelor鈥檚 degree and the master鈥檚 degree. However, completion of 10 or more units of coursework in electrical and computer听engineering taken for the master鈥檚 degree satisfies the professional development requirement of the undergraduate program.

The program of studies for the master鈥檚 degree may include up to 20 units of electrical and computer engineering upper-division elective coursework excluding ECEN听188 and 189. These undergraduate units can count toward a master鈥檚 degree only if a grade of 鈥淏鈥� or better is earned.听Full-time students enrolling in February of their junior year may听complete both degrees within five years.

Electrical and Computer Engineering Laboratories

The Electrical and Computer Engineering program is supported by well-equipped laboratories. Some are dedicated solely to lower division courses such as circuits and electronics. In addition, the department has a research and upper division teaching laboratories supporting a wide range of program focus areas..

The Electromagnetics and Communications Laboratory provides a full range of modern RF measurement capabilities up to 22 GHz, including a number of vector network analyzers, spectrum analyzers, and antenna measurement systems. This lab also includes complete production facilities for prototyping printed microwave circuits and antennas. Further, the lab has extensive computer-aided design and simulation capability, including both commercial packages and research-grade in-house solvers. In both research and teaching, connections between physical hardware measurements and computer simulations are stressed.

The Computer Systems Laboratory supports various research projects in hardware-software co-design of digital systems. Examples of target designs include Internet-of-Things (IoTs), wearable devices, wireless sensor networks (WSNs), satellite on-board computers, and neural network (NN) accelerators. Non-functional design concerns such as real-timeness, low-power, thermal behavior, security, or privacy are also important research topics studied in the Computer Systems Laboratory. The lab supports both graduate and undergraduate student research and has the following facilities to support student research: various FPGAs, MPSoC prototyping boards, GPU workstations for NN training, and power monitoring tools.

The IC Design and Technology Laboratory is dedicated to teaching and research topics on electronic materials and devices, integrated circuit design, and IC manufacturing technologies. Current research topics include modeling complex electronic devices using variational methodologies, materials and device characterizations, 听fabrication and experimental studies of photovoltaic devices, emission free smart infrastructure, and optimizing energy infrastructure.

The Complex Systems and Control Laboratory provides an experimental environment for students in the area of control system engineering. The lab includes computer-controlled DC motors. These motors provide students with a range of qualitative and quantitative experiments such as inverted pendulum for learning the utility and versatility of feedback in computer-controlled systems.听The lab also has a Linux-based workstation with GPUs for simulating brain-inspired architectures using emergent memory nanodevices (memristors and memcapacitors) as synapses for artificial neural networks.

The Latimer Energy Laboratory (LEL) supports a very wide range of activities relating to solar energy, more specifically photovoltaic (PV) and management of renewable energy sources, from K-12 outreach through graduate engineering. The laboratory focuses on two major directions: 1) measurement and characterization of different renewable energy sources; and 2) integration of renewable energy into the electric grid. The lab instrumentation includes听pyranometers, VIS-IR spectrometers, metallurgical microscopes, source meters, grid simulator software and related computers.

The Thermal听and Electrical Nanoscale Transport (TENT) Laboratory provides teaching and research facilities for modeling, simulation, and characterization of devices and circuits in the nanoscale. Ongoing research topics include silicon heterostructures; thin dielectric;, high-frequency device听and circuit parameter extraction; carbon nanostructures used as electrical interconnect and thermal interface materials; and compact modeling of transistors and interconnects for large-scale circuit simulation. This laboratory is located inside NASA Ames Research Center in Moffett Field, California, and was established to conduct, promote, and nurture nanoscale science and technology, interdisciplinary research, and education activities at the University.

The Information Processing and Machine Learning Laboratory 听supports research in theoretical algorithm development in digital signal processing, adaptive and nonlinear signal processing, machine learning and deep learning, coding and information theory, private information retrieval, and secure and fault-tolerant distributed computing. Application areas include speech, audio, image and video processing for computer vision, communications, biological testing and diagnostics, artificial intelligence (AI), cloud computing, machine learning in the cloud, distributed storage systems, cache networks, and server-based and peer-to-peer networking.

The Human-Machine Interaction & Innovation () Laboratory supports research in Human-Robot Interaction, Assistive Robotics, Intelligent Systems and Assistive Technologies with a special focus on enhancing human performance. The lab is equipped with several robotic systems, including mobile manipulators and humanoid robots. Additionally, the lab has several wearable sensors, such as electroencephalogram (EEG) and electrocardiogram (ECG), in order to develop AI-based intelligent systems that improve interactions between machines and humans.

Lower-Division Courses

20. Emerging Areas in Electrical and Computer Engineering

Introduction to new frontiers in electrical and computer engineering. Hands-on activities and visits to research and production facilities in Silicon Valley companies to learn how the fundamentals of electrical and computer engineering are enabling new emerging technologies. (2 units)

21. Introduction to Logic Design

Boolean functions and their minimization. Combinational circuits:听adders, multipliers, multiplexers, decoders.听Sequential logic circuits: latches and flip-flops,听registers,听counters. Memory. Busing. Programmable logic. Use of industry quality CAD tools for schematic capture and HDL in conjunction with FPGAs. Corequisite: ECEN听21L. (4 units)

21L. Logic Design Laboratory

Laboratory for ECEN听21. Corequisite: ECEN听21. (1 unit)

49. Fundamentals of Electricity for Civil Engineers

Transducers. Motors, generators and efficiency. DC and AC circuits. One and three-phase power systems. Sources of electricity. Hydroelectric power, generation, and pumps. Electrical diagrams and schematics. (4 units)

50. Electric Circuits I

Physical basis and mathematical models of circuit components and energy sources. Circuit theorems and methods of analysis are applied to DC and AC circuits. Prerequisites: Math 13. Corequisite: ECEN听50L, Math 14.听(4 units)

50L. Electric Circuits I Laboratory

Laboratory for ECEN听50. Corequisite: ECEN 50. (1 unit)

Upper-Division Courses

100. Electric Circuits II

Continuation of ECEN听50. Sinusoidal steady state and phasors, transformers, resonance, Laplace analysis, transfer functions. Frequency response analysis. Bode diagrams. Switching circuits. Prerequisite: ECEN听50 with a grade of C-听or better, or PHYS 70. Corequisite: ECEN听100L, AMTH 106. (4 units)

100L. Electric Circuits II Laboratory

Laboratory for ECEN听100. Corequisite: ECEN听100. (1 unit)

104. Electromagnetics I

Vector analysis and vector calculus. The laws of Coulomb, Lorentz, Faraday, and Gauss. Dielectric and magnetic materials. Energy in electric and magnetic fields. Capacitance and inductance. Maxwell鈥檚 equations. Wave equation. Poynting vector. Wave propagation and reflection听in transmission lines. Radiation. Prerequisites: PHYS 33 and ECEN听50 with a grade of C-听or better. Corequisite: ECEN听104L. (4 units)

104L. Electromagnetics I Laboratory

Laboratory for ECEN听104. Corequisite: ECEN听104. (1 unit)

105. Electromagnetics II

In-depth study of several areas of applied electromagnetics such as transmission lines circuits including microstrip and strip lines, Smith Chart and bounce diagram, magnetic circuits, antennas and antenna arrays. Prerequisite: ECEN听104. Corequisite: ECEN听105L. (4 units)

105L. Electromagnetics II Laboratory

Laboratory for ECEN听105. Corequisite: ECEN听105. (1 unit)

110. Linear Systems

Signals and system modeling. Laplace transform. Transfer function. Convolution. Discrete systems. Frequency analysis. Fourier series and transform. Filtering. State-Space models. Prerequisite: ECEN听100. Corequisite: ECEN听110L. (4 units)

110L. Linear Systems Laboratory

Laboratory for ECEN听110. MATLAB laboratory/problem sessions. Corequisite: ECEN听110. (1 unit)

112. Modern Network Synthesis and Design

Approximation and synthesis of active networks. Filter design using positive and negative feedback biquads. Sensitivity analysis. Fundamentals of passive network synthesis. Design project. Prerequisite: ECEN听110. Corequisite: ECEN听112L. (4 units)

112L. Modern Network Synthesis and Design Laboratory

Laboratory for ECEN听112. Corequisite: ECEN听112. (1 unit)

115. Electronic Circuits I

Study of basic principles of operation, terminal characteristics, and equivalent circuit models for diodes and transistors. Analysis and design of diode circuits, transistor amplifiers, and inverter circuits. Prerequisite: ECEN听50 with a grade of C-听or better. Corequisite: ECEN听115L. (4 units)

115L. Electronic Circuits I Laboratory

Laboratory for ECEN听115. Corequisite: ECEN听115. (1 unit)

116. Analog Integrated Circuit Design

Design and analysis of multistage analog amplifiers. Study of differential amplifiers, current mirrors and gain stages. Frequency response of cascaded amplifiers and gain-bandwidth considerations. Concepts of feedback, stability, and frequency compensation. Prerequisite: ECEN听115. Corequisite: ECEN听116L. (4 units)

116L. Analog Integrated Circuit Design Laboratory

Laboratory for ECEN听116. Corequisite: ECEN听116. (1 unit)

117. Advanced Analog Integrated Circuits

Design and analysis of BJT and MOSFET analog ICs. Study of analog circuits such as comparators, sample/hold amplifiers, and switched capacitor circuits. Architecture and design of analog to digital and digital to analog converters. Reference and biasing circuits. Study of noise and distortion in analog ICs. Prerequisite: ECEN听116. Corequisite: ECEN听117L. (4 units)

117L. Advanced Analog Integrated Circuits Laboratory

Laboratory for ECEN听117. Corequisite: ECEN听117. (1 unit)

118. Fundamentals of Computer-Aided Circuit Simulation

Introduction to algorithms and principles used in circuit simulation packages (such as SPICE). Formulation of equations for linear and nonlinear circuits. Detailed study of the three different types of circuit analysis (AC, DC, and transient). Discussion of computational aspects, including sparse matrices, Newton鈥檚 method, numerical integration, and parallel computing. Applications to electronic circuits, active filters, and CMOS digital circuits. Course includes a number of design projects in which simulation software is written in MATLAB and verified using SPICE. Prerequisites: ECEN听21, with a grade of C-听or better; ECEN听100 and 115. Corequisite: ECEN听118L. (4 units)

118L. Fundamentals of Computer-Aided Circuit Simulation Laboratory

Laboratory for ECEN听118. Corequisite: ECEN听118. (1 unit)

119. Current Topics in Electrical and Computer Engineering

Subjects of current interest. May be taken more than once if topics differ. (4 units)

120. Microprocessor System Design

Design and analysis of microprocessor-based systems. ARM architecture and Assembly Language programming. 听Integration of digital and analog input/output devices. Interrupts and Timers, Bus timing analysis, ADC and DAC, Waveform synthesis, Serial communication, Displays. Embedded computing platforms. Prerequisites: 听A grade of C- or better in 听ECEN 21 and in CSEN 11. Co-requisite: ECEN 120L. (4 units)

120L. Microprocessor System Design Laboratory

Laboratory for ECEN 120. Lab projects based on an embedded computer module to practical applications that reinforce class concepts and provide some opportunities for creative design. Prerequisites : A grade of C- or better in ECEN 21 and CSEN 11. Co-requisite: ECEN 120. (1 unit)

121. Real-Time Embedded Systems

Computing systems that measure, control, and interact. Real-time principles (multitasking, scheduling, synchronization), interfacing sensors, actuators and peripherals, implementation trade-offs, development environments, embedded software (file systems, drivers, libraries, software reuse, concurrency), buffered communications, 听Real-time multimedia. Prerequisites: A grade of C- or better in ECEN-120. Co-requisite: ECEN 121L. (4 units)

121L. Real-Time Embedded Systems Laboratory

Laboratory for ECEN 121. Co-requisite: ECEN 121. (1 unit)

122. Computer Architecture

Application of logic design concepts to computer architecture. Computation state machines. Computer instruction definition and formatting, the use of opcodes and operands. Memory, and how it is used to store instructions and data. Instruction execution (datapath design) and control transfer. Application of critical path concepts (performance evaluation) and Pipelining and Hazards. Caches and virtual memory. Hardware support for virtual memory. Prerequisites: A grade of C- or better in 听ECEN 21. Co-requisite: ECEN 122L. (4 units)

122L. Computer Architecture Laboratory

Laboratory for ECEN 122; implementation of simple datapath and its control logic in Verilog . Co-requisite: ECEN 122. (1 unit)

123. Mechatronics

Introduction to behavior, design, and integration of electromechanical components and systems. Review of appropriate electronic components/circuitry, mechanism configurations, and programming constructs. Use and integration of听sensors, microcontrollers, and actuators. Also listed as CSEN 123 and MECH 143. Prerequisite: ECEN听50 with a grade of C-听or better and CSEN 11. Corequisite: ECEN听123L. (4 units)

123L. Mechatronics Laboratory

Laboratory for ECEN听123. Also listed as CSEN 123L and MECH 143L. Corequisite: ECEN听123. (1 unit)

127. Advanced Logic Design

Contemporary design of finite-state machines as system controllers using FPGA devices. Minimization techniques, performance analysis, and modular system design. HDL simulation and synthesis. Also listed as CSEN 127. Prerequisite: ECEN听21 with a grade of C-听or better and CSEN 11.听Corequisites: ECEN听127L. (4 units)

127L. Advanced Logic Design Laboratory

Laboratory for ECEN听127. Design, construction, and testing of controllers from verbal specs. Use of CAD design tools. Also listed as CSEN 127L. Corequisite: ECEN听127. (1 unit)

130. Control Systems

Applications of control systems in engineering. Principle of feedback. Performance specifications: transient and steady-state response. Stability. Design of control systems by frequency and root locus methods. Computer-controlled systems. State-variable feedback design. Also listed as ECEN 230. Prerequisite: ECEN听110. Corequisite: ECEN听130L. (4 units)

130L. Control Systems Laboratory

Laboratory for ECEN听130. Corequisite: ECEN听130. (1 unit)

131. Introduction to Robotics

Overview of robotic systems and application areas. Kinematic Analysis of Robotic Manipulators. Joint-space trajectory planning. Linear PID control for manipulators. Prerequisite: AMTH 106. Corequisite: ECEN 131L (4 units)

131L. Introduction to Robotics Laboratory

Laboratory for ECEN 131. Laboratory for Robot Programming using Python and Robot Operating System (ROS): Prerequisite: Basic Programming. Corequisite: ECEN 131. (1 unit)

132. Design of Assistive Technologies

Accessible and Interactive Design. Design of Assistive Technologies. Prototype Development. Data Gathering. Data Analysis, Interpretation, and Representation. Project-based course. Prerequisites: AMTH 108 or equivalent. Also listed as ECEN 532. Corequisite: ECEN 132L. (4 units)

132L. Design of Assistive Technologies Laboratory

Laboratory for ECEN 132. Corequisite: ECEN 132. (1 unit)

133. Digital Signal Processing

Discrete signals and systems. Difference equations. Convolution summation. Z-transform, transfer function, system response, stability. Model based digital filter design and implementation. Frequency domain analysis. Discrete Fourier transform and FFT. Introduction to adaptive filter design and CNN architectures. Audio, video, and communication applications. Prerequisites: ECEN 110 or both ECEN 50 with a grade of C- or better, and MATH 51. Corequisite: ECEN 133L. (4 units)

133L. Digital Signal Processing Laboratory

Laboratory for ECEN听133. Laboratory for real-time processing. Corequisite: ECEN听133. (1 unit)

134. Introduction to Machine Learning

Classification models, cross-validation; supervised learning, linear and logistic regression, support vector machines; unsupervised learning, dimensionality reduction methods; tree based methods, and kernel methods, principal component analysis, K-means; reinforcement learning. Includes a significant project component 听using Python and other machine learning tools. Prerequisites: AMTH 108, MATH 53. (4 units)

139. Special Topics in Signals and Systems

Subjects of current interest. May be taken more than once if topics differ. (4 units)

141. Communication Systems

Review of signals and systems in both time and frequency domain. Review of probability, random variables, and random processes. Analog modulation and demodulation. The impact of noise on analog systems. Digital modulation/demodulation techniques and their performance in the presence of noise. 听Prerequisites: ECEN听110 and AMTH 108. Corequisite: ECEN听141L. (4 units)

141L. Communication Systems Laboratory

Laboratory for ECEN听141. Corequisite: ECEN听141. (1 unit)

142. Communications and Networking

Networking in different media. Effects of the media on data rate. Error/erasure detection and correction. Routing algorithms. Collision and retransmission in networks. Network coding algorithms. Prerequisite: AMTH 108 with a grade of C- or better; or its equivalent. Co-requisite: ECEN 142L. (4 units)

142L. Communications and Networking Laboratory

Laboratory for ECEN 142. Corequisite: ECEN 142. (1 unit)

144. Microwave Circuit Analysis and Design

The fundamental characteristics of passive and active electrical components. Parasitics, models, and measurements. Modeling of circuit interconnects . Study of crosstalk in high-speed digital circuits, matching circuits, power dividers and microwave filters. Prerequisite: ECEN听105. Corequisite: ECEN听144L. (4 units)

144L. Microwave Circuit Analysis and Design Laboratory

Laboratory for ECEN听144. Corequisite: ECEN听144. (1 unit)

151. Device Electronics for IC Design

Properties of materials, crystal structure, and band structure of solids. Carrier statistics and transport; p-n junction electrostatics, I-V characteristics, equivalent circuits. Metal-semiconductor contacts, Schottky diodes. MOS field-effect transistors, bipolar junction transistors. 听This course covers the essential device concepts necessary for analog, digital, and/or mixed signal circuit design. Credit not allowed for both ECEN 151 and ECEN 267.听Prerequisite or corequisite: ECEN 104. Corequisite: ECEN 151L. (4 units)

151L. Device Electronics Laboratory

Laboratory for ECEN听151. Corequisite: ECEN听151. (1 unit)

152. Integrated Circuit Fabrication Process Technology

Fundamental principles of processes essential for fabricating micro- and nano-electronic hardware ranging from Integrated circuits, MEMS and biosensors to power, control and optoelectronic devices. Physical and chemical models of semiconductor crystal growth, thermal oxidation and diffusion, ion implantation, Lithography, etching and cleaning, epitaxy, chemical and physical vapor deposition, metallization, etc. Process integration and simulation using TCAD. (4 units).

Also listed as ECEN 276. (4 units)

152L. Integrated Circuit Fabrication Process Technology Laboratory

Laboratory for ECEN听152. Corequisite: ECEN听152. (1 unit)

153. Digital Integrated Circuit Design

Introduction to VLSI design and methodology. Study of basic principles, material properties, fabrication, operation, terminal characteristics, and equivalent circuit models for CMOS听digital integrated circuits. Study of CMOS combinational and sequential integrated circuits 听and technology scaling. Physical design and layout principles.听Interconnect modeling. Semiconductor memories. Use of state-of-the-art CAD tools.听Prerequisites: ECEN/CSEN听21 and ECEN听50 with a grade of C-听or better. Corequisite: ECEN听153L. (4 units)

153L. Digital Integrated Circuit Design Laboratory

Laboratory for ECEN听153. Corequisite: ECEN听153. (1 unit)

156. Introduction to Nanotechnology

Introduction to the field of nanoscience and nanotechnology. Properties of nanomaterials and devices. Nanoelectronics: from silicon and beyond. Measurements of nanosystems. Applications and implications. Laboratory experience is an integral part of the course. Also listed as MECH 156. Prerequisites: PHYS 33 and either PHYS 34 or MECH听15. Corequisite: ECEN 156L. (4 units)

156L. Introduction to Nanotechnology Laboratory

Laboratory for ECEN 156. Also listed as MECH 156L. Corequisite: ECEN听156. (1 unit)

158. Introduction to Neuromorphic Computing and Mem-device Computing

This course is an overview of neuromorphic computing based on brain-inspired computing architectures. Traditional neural networks with different network topologies and mem-devices as synapses are studied for various neuromorphic tasks. Prerequisites: ECEN 50 or equivalent, senior standing, and familiarity with Python (or CSEN 11). Corequisite: ECEN 158L.听(4 units)

158L. Introduction to Neuromorphic Computing and Mem-device Computing听Laboratory

Laboratory for ECEN 158. Corequisite: ECEN 158. (1 unit)

160. Chaos Theory, Metamathematics, and the Limits of Science: An Engineering 听Perspective on Religion

Limitations of science are examined in the framework of nonlinear system theory and metamathematics. Strange attractors, bifurcations, and chaos are studied in some detail. Additional topics include an introduction to formal systems and an overview of Godel鈥檚 theorems. The mathematical background developed in the course is used as a basis for exploring the relationship between science, aesthetics, and religion. Particular emphasis is placed on the rationality of faith. Also listed as ECEN听217. Prerequisites: AMTH 106 (or an equivalent course in differential equations), and a basic familiarity with MATLAB. Corequisite: ECEN听160L. (4 units)

160L. Chaos Theory, Metamathematics, and the Limits of Science: An Engineering Perspective on Religion Laboratory

Laboratory for ECEN听160. Corequisite: ECEN听160. (1 unit)

161. The Beauty of Nature and the Nature of Beauty

Beauty is examined from an interdisciplinary perspective, taking into account insights from mathematics, physics, engineering, neuroscience, and psychology, as well as philosophy, art history, and theology. Technical topics include information theory, quantum computing, fractal geometry, complex systems, cellular automata, Boolean networks, and set theory. Prerequisite: AMTH 106 (or equivalent). Familiarity with basic concepts in probability theory is expected, as is some experience with MATLAB. Corequisite: ECEN 161L. (4 units)

161L. The Beauty of Nature and the Nature of Beauty Laboratory

Laboratory for ECEN 161. Corequisite: ECEN 161.听(1 unit)

162. Quantum and Parallel Algorithms for Scientific Computing

Quantum and parallel computing are explored as paradigms for high performance scientific computing. Particular emphasis is placed on quantum algorithms and graph-theoretic methods for parallelizing the solution of large sparse systems of equations. Since a proper understanding of these topics requires a background in matrix theory, functional analysis, cryptology and number theory, these areas are covered in some detail. Prerequisites: MATH 53 or equivalent, and familiarity with MATLAB. Corequisite: ECEN 162L. (4 units)

162L. 听Quantum and Parallel Algorithms for Scientific Computing Lab听

Laboratory for ECEN 162. Corequisite: ECEN 162. (1 unit)

164. Introduction to Power Electronics

Power and efficiency computations, rectifiers, power devices, DC-to-DC converters, AC-to-DC converters, and DC-to-AC inverters. Prerequisite: ECEN听115. Corequisite: ECEN听164L. (4 units)

164L. Introduction to Power Electronics Laboratory

Laboratory for ECEN听164. Corequisite: ECEN听164. (1 unit)

167. Medical Imaging Systems

Overview of medical imaging systems including sensors and electrical interfaces for data acquisition; mathematical models of the relationship of structural and physiological information to sensor measurements, resolution, and accuracy limits; and the conversion process from electronic signals to image synthesis. Analysis of the specification and interaction of the functional units of imaging systems and the expected performance. Focus on MRI, CT, and ultrasound PET, and impedance imaging. Also listed as BIOE 167, BIOE 267. Prerequisite: BIOE 162 or ECEN 110 or MECH 142. (4 units)

180. Introduction to Information Storage

Storage hierarchy. Design of memory and storage devices, with a particular emphasis on magnetic disks and storage-class memories. Error detection, correction, and avoidance fundamentals. Disk arrays. Storage interfaces and buses. Network attached and distributed storage, interaction of economy, and technological innovation. Also listed as CSEN听180. Prerequisites: ECEN听21 or CSEN 21, and CSEN 20; CSEN 122 is recommended. (4 units)

182. Energy Systems Design

Introduction to alternative energy systems with emphasis on those utilizing solar technologies; system analysis including resources, extraction, conversion, efficiency, and end-use; project will design power system for a house off or on grid making best use of renewable energy; system design will include power needs, generation options, storage, back-up power. Prerequisite: ECEN听50. (4 units)

183. Power Systems Analysis

Analysis, design, and optimization of power systems for traditional and renewable power generation. Balanced three phase circuits. Transformers and transmission lines. Also listed at ECEN 281E. Prerequisite: ECEN听100 or equivalent. Corequisite: ECEN听183L. (4 units)

183L. Power Systems Analysis Laboratory

Laboratory for ECEN听183. Corequisite: ECEN听183. (1 unit)

184. Power System Stability and Control

Examine power system stability and power system control, including load frequency control, economic dispatch, and optimal power flow. Also listed as ECEN听231. Prerequisites: ECEN听183 or equivalent. (4 units)

188. Co-op Education

Integration of classroom study and practical experience in a planned program designed to give students practical work experience related to their academic field of study and career objectives. The course alternates (or parallels) periods of classroom study with periods of training in industry or government. Satisfactory completion of the assignment includes preparation of a summary report on co-op activities. P/NP grading. May be taken twice. May not be taken for graduate credit. (2 units)

189. Co-op Technical Report

Credit is given for a technical report on a specific activity such as a design or research project, etc., after completing the co-op assignment. Letter grades based on content and presentation quality of report. May be taken twice. May not be taken for graduate credit. Prerequisite: ECEN听188. Approval of department co-op advisor required. (2 units)

192. Introduction to Senior Design Project

Junior preparation for senior project. An introduction to project requirements and participation in the coordination of the senior conference. Tentative project selection.(Cross-listed with ENGR 197A.)听(1unit)

192L. Electronics Prototyping

Students will design, implement, and characterize an electronic system. Students will do schematic capture, PCB layout and soldering for a simple consumer application. (1 unit)

194. Design Project I

Specification of an engineering project, selected with the mutual agreement of the student and the project advisor. Complete initial design with sufficient detail of target specification. Incorporation of relevant engineering standards and appropriate realistic constraints. Initial draft of the project report. Corequisite: ENGL 181. (2 units)

195. Design Project II

Implementation, construction, and testing of the project, system, or device. Sustainability analysis. Demonstration of project and formal design review. Prerequisite: ECEN听194. (2 units)

196. Design Project III

Continued design, implementation, and testing of the project, system, or device to improve function and add capability. Reliability analysis. Formal public presentation of results. Final report. Prerequisite: ECEN听195. (1 unit)

199. Directed Research/Reading

Investigation of an approved engineering problem and preparation of a suitable project report. Open only to electrical and computer engineering majors or electrical engineering majors. (1鈥�6 units)